Blog

Most stablecoins track the US dollar. But if your revenue, costs, and recipients are in euros, paying in a dollar-pegged token means an FX round-trip on every transaction. EURC solves that: it's a euro-denominated stablecoin that lets euro-native businesses move money on blockchain rails without leaving the euro.

‍

Here's what EURC is, how it works, and why it has become the default euro stablecoin for regulated business in 2026.

EURC in one sentence

EURC (Euro Coin) is a stablecoin pegged 1:1 to the euro, issued by Circle — the same company behind USDC — and backed fully by euro-denominated reserves. One EURC is designed to always be redeemable for one euro.

‍

Think of it as a digital euro you can send anywhere in minutes, 24/7, without a bank wire.

Who issues EURC, and why that matters

EURC is issued by Circle, a regulated financial technology company. That matters for one reason above all: regulation. Circle holds an EU Electronic Money Institution (EMI) license in France, and that single authorization passports EURC across all 27 EU member states under MiCA, the EU's crypto framework.

‍

In practice, EURC is a MiCA-compliant e-money token. When MiCA's rules took full effect and non-compliant stablecoins were removed from EU-regulated exchanges, EURC was one of the assets that stayed — and it captured much of the resulting demand. By 2026 it had become the dominant euro stablecoin, holding roughly 41% of the euro-stablecoin market, up from about 17% a year earlier.

‍

For a business, that means EURC isn't a fringe experiment — it's the euro stablecoin most likely to be accepted, supported, and compliant across Europe.

What backs EURC?

EURC is 100% backed by euro reserves held in cash and cash-equivalent instruments under Circle's full-reserve model. Circle publishes regular reserve reporting, the same transparency approach it applies to USDC. Each token in circulation is matched by euros held in reserve, which is what keeps the 1:1 peg dependable.

‍

As of 2026, EURC's circulation sits in the range of roughly €400–460 million — smaller than dollar stablecoins, but by far the largest in the euro category.

Which blockchains support EURC?

EURC is a multi-chain asset. It runs natively on:

‍

• Ethereum (where the majority of euro-stablecoin supply sits)
• Base
• Solana
• Stellar
• Avalanche
• World Chain

‍

The network you use determines transfer speed and fees. For payouts, low-fee chains like Solana, Base, or Stellar keep costs to cents; Ethereum is the most liquid but the most expensive to transact on.

Why businesses use a euro stablecoin

If you already operate in euros, why hold a euro on a blockchain instead of in a bank? A few concrete reasons:

‍

• No FX round-trip. Paying euro-based recipients in a dollar stablecoin means converting EUR → USD → EUR, losing spread each way. EURC keeps euros as euros.
• Speed. EURC settles in minutes, any time — including weekends and holidays, when SEPA and bank rails are closed.
• Global reach. A recipient anywhere with a wallet can receive euros, without needing a European bank account.
• Programmability. EURC can be sent via API for automated payouts, something traditional euro rails don't offer natively.
• Regulatory comfort. As a MiCA-compliant token, EURC fits the compliance expectations of European banks, auditors, and partners.

EURC vs a bank euro balance

A euro in your bank and a euro in EURC are both euros — the difference is the rails.

‍

‍

EURC doesn't replace your bank — it complements it for fast, global, programmable euro movement.

Frequently asked questions

What is EURC? EURC (Euro Coin) is a euro-pegged stablecoin issued by Circle, backed 1:1 by euro reserves. It lets businesses hold and send euros on blockchain networks.

‍

Is EURC the same as USDC? They share an issuer (Circle) and a full-reserve, MiCA-compliant model, but EURC is pegged to the euro while USDC is pegged to the US dollar. See our EURC vs USDC comparison.

‍

Is EURC regulated? Yes. EURC is a MiCA-compliant e-money token. Circle's French EMI license passports it across all 27 EU member states.

‍

What backs EURC? Euro-denominated reserves held 1:1 against tokens in circulation, under Circle's full-reserve model with regular reserve reporting.

‍

Which networks support EURC? Ethereum, Base, Solana, Stellar, Avalanche, and World Chain. Choose a low-fee network for cost-efficient payouts.

‍

Can businesses pay in EURC? Yes — EURC is widely used for euro-denominated payouts to contractors, suppliers, and partners, especially within the EU. Learn more in our guide to paying in EURC.

Move euros the modern way

If your business runs on euros, you can settle in euros on-chain — fast, global, and MiCA-compliant. INXY's EURC mass payouts let you fund and pay in euros without the FX round-trip or the crypto overhead. New to the asset? Compare it with the dollar option in EURC vs USDC.

‍

This article is general information, not financial or legal advice.

‍

Paying a global team through banks means FX spreads, 3–5 day waits, intermediary fees, and a recipient in another country who receives less than you sent. Paying them in USDC — a fully-reserved, dollar-pegged stablecoin — can turn that into a same-day transfer for cents. But doing it properly, at scale, and in a way your accountant accepts takes more than a wallet.

‍

This guide walks through how to pay contractors in USDC — the setup, the networks, the compliance basics, and how to keep your books in fiat.

Why businesses pay in USDC

USDC (issued by Circle) is a stablecoin pegged 1:1 to the US dollar and backed by cash and short-dated US Treasuries, with monthly attestations from Deloitte. For paying people, that combination is the point:

‍

• Stable value. Recipients get dollars, not a volatile asset. 1 USDC ≈ $1 at send and at cash-out.
• Speed. Payments settle in minutes, 24/7, including weekends and holidays.
• Global reach. Anyone with a wallet can receive, regardless of local banking.
• Low cost. On low-fee networks, a payout costs cents rather than a wire fee.
• Regulatory standing. USDC is MiCA-compliant in the EU, which makes it a durable choice for European corridors (more on that below).

Before you start: four things to get right

1. Confirm the recipient can receive USDC. They need a wallet address on a network you both support (Ethereum, Solana, Base, Polygon, and others). Confirm the network explicitly — a USDC transfer sent to the wrong network can be lost.

‍

2. Decide who bears the fee. Will you gross up payments so the contractor receives the full agreed amount after network fees, or net it out? Set this in the contract.

‍

3. Handle tax and classification. Paying in stablecoin doesn't change worker classification or your reporting obligations. Contractors are still responsible for their own taxes; you still keep records. Treat USDC payouts like any other payment for compliance purposes.

‍

4. Keep fiat records. Your accounting should capture the fiat value at the time of payout, the fee, the recipient, and the transaction hash — not just on-chain data.

Method 1: Manual USDC payments

For a few contractors, you can pay directly from a self-custody wallet or exchange.

‍

Steps:

‍

1. Fund a wallet with USDC and the network's gas token.
2. Confirm each contractor's address and network in writing.
3. Send each payment; send a small test transfer first for new, large recipients.
4. Record each transaction hash against the invoice and its fiat value.

‍

Limits: no automation, no built-in screening, and manual reconciliation. It works for a handful of people and breaks down beyond that.

Method 2: Bulk USDC payouts via CSV or API

For a real team — dozens or thousands of contractors, affiliates, or creators — a payout platform is the practical route. You prepare a recipient list and process it as one batch.

‍

A typical flow:

‍

1. Fund in fiat. With a fiat-native provider like INXY, top up in EUR or USD via SEPA or SWIFT — no need to buy crypto yourself.
2. Upload a CSV or call the API. Include recipient, amount, and network. The API path lets you trigger payouts straight from your own platform or billing system.
3. Automated compliance. The provider runs KYT and sanctions screening and validates addresses before sending.
4. Recipients get paid. USDC lands in minutes on supported networks.
5. Reconcile in fiat. Export batch-level records with fiat values, fees, payout IDs, and hashes.

‍

This removes the two hardest parts of paying a global team in crypto: compliance and accounting. You never manage keys or gas, and your finance team works in EUR or USD.

Choosing the network for USDC payouts

USDC runs natively on several chains. For payouts:

‍

• Solana / Base / Polygon: cents per transfer, fast — ideal for high-volume contractor and affiliate payments.
• Ethereum (ERC-20): the most liquid and widely integrated, but the most expensive — reserve it for recipients who require it.

‍

Match the network to the recipient's wallet and the payout size; a platform can route this automatically.

Compliance: don't skip screening

Paying contractors across borders means you're exposed to sanctions and AML rules. Two non-negotiables:

‍

• Sanctions screening of recipient wallets before payout.
• Transaction monitoring (KYT) to flag high-risk addresses.

‍

Manual and script-based payouts leave this to you. A regulated payout provider builds it into the flow — which is often the difference between "using crypto rails" and "creating a banking-risk problem."

Frequently asked questions

Can I pay international contractors in USDC? Yes. Anyone with a compatible wallet can receive USDC in minutes, regardless of country, as long as it's legal in their jurisdiction. It's widely used for cross-border contractor, freelancer, and affiliate payments.

‍

Do I need to hold crypto to pay contractors in USDC? No. A fiat-native platform lets you fund in EUR or USD and keep accounting in fiat while recipients receive USDC.

‍

Is paying contractors in USDC legal? Paying in USDC is legal in most jurisdictions, but you remain responsible for worker classification, tax reporting, and AML/sanctions compliance — the same as any payment method. Check local rules for your recipients.

‍

What does it cost to pay someone in USDC? On low-fee networks like Solana, Base, or Polygon, a USDC transfer costs cents. On Ethereum it can be several dollars. Choosing the network controls the cost.

‍

How do I keep accounting clean when paying in USDC? Record the fiat value at payout time, the fee, and the transaction hash for each payment. Payout platforms generate these exports automatically.

Pay your global team without the crypto overhead

If you're paying contractors, affiliates, or creators at scale, you shouldn't be managing wallets, gas, and screening by hand. INXY's mass USDC payouts let you fund in fiat, pay globally in minutes, and reconcile in EUR or USD — with compliance built in. Building a broader payroll flow? See our contractor payroll solution, or weigh the assets in our USDT vs USDC comparison.

‍

If your business is about to move real money through USDT, "is USDT safe?" is the right question to ask first. Tether is the largest stablecoin in the world — roughly $188 billion in circulation and ~59% of the entire stablecoin market as of mid-2026 — but scale and safety aren't the same thing.

‍

This is a balanced look at what actually backs USDT, where the real risks sit, and how those risks apply specifically to a company using Tether for payouts rather than trading.

What USDT is — and what "safe" means here

USDT (Tether) is a stablecoin designed to hold a 1:1 peg to the US dollar. Each token is meant to be redeemable for one dollar, backed by reserves Tether holds. For a business, "safe" breaks into three practical questions:

‍

1. Peg risk — will 1 USDT still be worth ~$1 when my recipient cashes out?
2. Counterparty risk — is the issuer solvent and are the reserves real?
3. Operational and regulatory risk — can I legally and reliably use it where I operate?

‍

Let's take them in order.

Peg stability: strong, with rare wobbles

In normal conditions, USDT trades within a fraction of a cent of $1. Its depth of liquidity is unmatched — it's the most traded crypto asset on earth, which makes the peg resilient.

‍

It is not immune, though. During acute market stress (the 2022 Terra/UST collapse, the 2023 US regional-bank episode) USDT briefly de-pegged by a few percent before recovering. For a payout business, the takeaway is not "avoid USDT" but "don't sit on large idle balances." If you convert at payout time rather than warehousing Tether, short-lived wobbles rarely reach the recipient.

Reserves: what backs USDT in 2026

This is where scrutiny has historically been sharpest, and where transparency has improved.

‍

Per Tether's Q1 2026 attestation (BDO Italia), the company reported roughly $191.8 billion in total assets against its liabilities, with a reserve mix heavily weighted toward liquid, low-risk holdings:

‍

• ~$135 billion in US Treasuries — the bulk of reserves in the most liquid safe asset there is.
• ~$13 billion in gold, plus Bitcoin and other holdings.
• Reported net equity of around $8 billion, a buffer above the tokens in circulation.

‍

Two honest caveats remain:

‍

• Tether publishes attestations, not a full audit by a Big Four firm. An attestation confirms balances at a point in time; it's less rigorous than a continuous audit. Critics have pushed Tether on this for years.
• A minority of reserves has historically included assets beyond cash and Treasuries. The direction of travel is toward higher-quality, more liquid reserves, but it's worth knowing what you hold.

‍

For most businesses, a reserve base dominated by US Treasuries is reassuring. The transparency gap versus a fully audited competitor is real but narrowing.

Regulatory risk: the biggest practical issue for EU businesses

Here's the risk that most directly affects where and how you can use USDT: Tether did not seek authorization under the EU's MiCA regulation.

‍

The consequences are concrete. Through late 2024 and 2025, MiCA-regulated exchanges removed USDT for customers in the European Economic Area — Coinbase, Crypto.com, Binance (EEA) and others delisted or restricted it — because offering a non-authorized stablecoin put their own licenses at risk. USDT trading volumes on EU venues fell sharply, while MiCA-compliant alternatives like USDC and EURC gained share.

‍

USDT is not banned to hold, but its regulated on/off-ramp availability in the EU has narrowed. Tether has instead pursued a US federal path (under the GENIUS Act) via a US-domiciled entity. If your recipients or your business are EU-based, this matters: a MiCA-compliant stablecoin may be the more durable choice for European corridors. (See "Is USDC regulated?" and our USDT vs USDC comparison.)

Operational risk: irreversibility and wrong-network errors

Independent of Tether the company, USDT carries the operational risks of any on-chain asset:

‍

• Irreversibility. A payout sent to a wrong or wrong-network address is typically gone.
• Network fragmentation. USDT on Tron, Ethereum, Solana and others isn't interchangeable at the address level.
• Compliance exposure. Paying a sanctioned or high-risk wallet is a legal problem, not just a technical one.

‍

These are managed with address validation, test transfers, and — at volume — KYT and sanctions screening built into your payout flow.

So, is USDT safe for business payouts?

A fair summary:

‍

• Peg: Strong in normal conditions; convert at payout time to avoid stress-window exposure.
• Reserves: Large and Treasury-heavy, but attested rather than fully audited.
• Regulation: The real watch-item — limited MiCA standing constrains EU usage.
• Operations: Safe when you use validation, screening, and disciplined records.

‍

For high-volume global payouts, USDT remains the most liquid and widely accepted stablecoin. The smart posture is to use it deliberately: don't warehouse it, screen your recipients, keep clean fiat records, and choose a MiCA-compliant asset where European regulation demands it.

Frequently asked questions

Is USDT backed by real dollars? USDT is backed by reserves that, per Tether's 2026 attestations, are dominated by US Treasuries plus cash equivalents, gold, and other assets. These are confirmed by attestation rather than a full independent audit.

‍

Can USDT lose its peg? It can briefly deviate during extreme market stress, as it has a few times historically, but it has recovered each time. Deep liquidity supports the peg in normal conditions.

‍

Is USDT legal in the EU? Holding USDT is not illegal, but Tether is not MiCA-authorized, and many EU-regulated exchanges have delisted it for EEA users. For EU corridors, a MiCA-compliant stablecoin is often more practical.

‍

Is USDT safe enough for payroll and affiliate payouts? For most businesses, yes — provided you convert near payout time, screen recipients, and keep proper records. The controls matter as much as the asset.

Use USDT with the controls built in

The safest way to use USDT for business isn't to trust a single wallet — it's to run payouts through infrastructure that screens recipients, validates networks, and reports in fiat. That's how INXY's mass USDT payouts are designed: fund in EUR or USD, pay out globally, and keep audit-ready records — without warehousing crypto risk.

‍

This article is general information, not financial or legal advice. Evaluate stablecoin exposure against your own jurisdiction and risk policy.

‍

USDT is a single asset, but it lives on more than a dozen blockchains — and the network you choose can change the cost of a transfer by 100x or more. For a one-off payment that's a rounding error. For a business sending thousands of payouts a month, picking the wrong chain quietly burns thousands of dollars.

‍

This is a practical breakdown of the cheapest network to send USDT in 2026, what drives the fee on each chain, and how to match the network to the payout.

Why USDT fees vary so much

The fee to move USDT has nothing to do with Tether itself. It's the network's gas fee — paid in the chain's native token — that varies:

‍

• On Ethereum (ERC-20) you pay ETH gas, which is priced by network congestion and can spike sharply.
• On Tron (TRC-20) you pay in TRX energy/bandwidth, which is low and stable.
• On Solana, TON, and BNB Chain, base fees are engineered to be very small.

‍

So "how much does it cost to send USDT" is really "which network did you send it on."

USDT fee comparison (2026)

Approximate, indicative costs — real fees move with congestion and the native token price. Use this for relative comparison, not exact quotes.

‍

‍

The short version: for pure on-chain cost, Solana and TRC-20 lead, with TON unbeatable for exchange withdrawals. ERC-20 is the most expensive and should be reserved for recipients who specifically need it.

Match the network to the payout amount

Cheapest isn't always "correct." The right network depends on the size of the transfer and where the recipient wants the funds.

‍

• Micro-payouts (under ~$50): TRC-20, Solana, or TON. Fees would otherwise eat a meaningful slice of the payment.
• Standard payouts ($50–$5,000): Solana, Polygon, or TRC-20 keep costs to pennies while settling fast.
• Large transfers (over ~$5,000): Cost matters less relative to the amount. ERC-20 is acceptable if the counterparty requires it — the $10–20 fee is small against the principal, and Ethereum's liquidity and integrations are unmatched.

Beyond the headline fee

Fee-per-transfer is the obvious number. Three others matter just as much at scale:

‍

1. Recipient acceptance. The cheapest network is useless if the recipient's wallet or exchange doesn't support it. Always confirm the network before sending — cross-network mistakes are irreversible.

‍

2. Native-token overhead. Every network needs its gas token in your wallet. Running payouts across five chains means monitoring and topping up five different balances — an operational cost that doesn't show up in the per-transfer fee.

‍

3. Failed and stuck transfers. Underpriced gas on congested networks means stuck transactions and support tickets. Reliability has a cost, too.

How platforms cut costs further

When you run payouts through a fiat-native platform instead of manually, network fees stop being your problem in two ways:

‍

• Automatic routing. The platform sends each payout on a supported low-fee network without you managing gas on every chain.
• No native-token juggling. You fund a balance in EUR or USD; the provider handles conversion and gas. Your reporting stays in fiat.

‍

That removes the hidden operational cost of multi-chain payouts, not just the visible per-transfer fee.

Frequently asked questions

What is the cheapest network to send USDT? For on-chain self-custody transfers, Solana and Tron (TRC-20) are cheapest, and TON offers the lowest withdrawal fees on major exchanges. Ethereum (ERC-20) is the most expensive.

‍

Is TRC-20 always the cheapest for USDT? Not always. TRC-20 is very cheap and has the deepest USDT liquidity, but Solana and TON can be cheaper still per transfer. TRC-20 remains the most widely accepted low-fee option.

‍

Why is sending USDT on Ethereum so expensive? ERC-20 transfers pay ETH gas, priced by network demand. During congestion, a single USDT transfer can exceed $30 in gas.

‍

Does the network affect how much USDT the recipient receives? The network sets the fee you pay to send. Choosing a low-fee chain means more of your budget reaches recipients, especially across many small payouts.

‍

Can I send USDT across networks? An address is tied to one network. To move USDT between chains you need a bridge or an exchange — you can't send TRC-20 USDT directly to an ERC-20 address.

Send on the right network, automatically

If you're running regular USDT payouts, you shouldn't be managing gas tokens across five blockchains. INXY's mass USDT payouts route each transfer over low-fee networks and report everything back in EUR or USD — so you get the cheapest path without the multi-chain overhead. New to bulk sending? Start with our step-by-step USDT payout guide.

‍

Paying twenty affiliates, two hundred contractors, or two thousand players one transaction at a time does not scale. If you need to send USDT to multiple wallets, the method you choose determines your cost, your error rate, and how much of your finance team's week disappears into copy-pasting addresses.

‍

This guide covers the three practical ways to run a bulk USDT transfer in 2026 — manual, scripted, and platform-based — with the trade-offs of each, the mistakes that cost real money, and how to keep clean records for accounting.

What "mass USDT payout" actually means

A mass USDT payout is a single, structured operation that distributes Tether to many recipients at once. Instead of initiating each transfer by hand, you prepare a list of addresses and amounts and process them as a batch.

‍

Three things make this harder than it looks:

‍

• Network choice. USDT exists on Tron (TRC-20), Ethereum (ERC-20), BNB Chain (BEP-20), Solana, TON, Polygon and others. A recipient's address is network-specific — send TRC-20 USDT to an ERC-20 address and the funds are typically lost.
• Fees at volume. A fee that looks trivial for one transfer becomes a line item when multiplied across thousands of recipients.
• Reconciliation. Finance needs a fiat value, a timestamp, and a transaction hash for every payout — not just a wall of blockchain data.

‍

Keep these three in mind; every method below is really a different answer to them.

Method 1: Manual transfers from a wallet or exchange

The simplest approach is to send USDT one recipient at a time from a self-custody wallet (MetaMask, Trust Wallet, Tronlink) or an exchange account.

‍

When it works: fewer than ~10 recipients, infrequent payouts, no automation budget.

‍

Steps:

‍

1. Confirm each recipient's network and address in writing. Never assume the network.
2. Fund your wallet with enough USDT and the native gas token (TRX for TRC-20, ETH for ERC-20, and so on).
3. Send each transfer, double-checking the first and last four characters of every address.
4. Save each transaction hash against the recipient's name for your records.

‍

The catch: manual sending does not scale and has no safety net. A single mistyped address is irreversible. There is no batch confirmation, no built-in fiat reporting, and no sanctions screening. Beyond a handful of recipients, error risk climbs fast.

Method 2: Scripts and smart-contract batching

Technical teams can automate payouts with the blockchain's own tooling — a script that loops through a recipient list, or a "multisend" / "disperse" smart contract that pushes many transfers in one on-chain transaction.

‍

When it works: you have engineering resources, a stable set of networks, and you want control over the flow.

‍

What you gain:

‍

• Batching efficiency. Multisend contracts bundle many recipients into a single transaction, which can reduce total gas versus sending individually on some networks.
• Full automation. A script can pull addresses from your database and fire payouts on a schedule.

‍

What you take on:

‍

• Key management. Your script needs access to a funded hot wallet holding private keys — an operational and security liability.
• Gas handling. You must monitor and top up the native token on every network you use.
• No compliance layer. Scripts don't screen recipients against sanctions lists or flag high-risk addresses. That's on you.
• Accounting glue. You still have to convert on-chain data into fiat-denominated records your auditors will accept.

‍

Scripting trades human error for engineering overhead. It's powerful, but you are now running payment infrastructure as a side project.

Method 3: A payout platform (CSV or API)

A dedicated payout platform abstracts the wallet, keys, gas, and networks away. You upload a CSV of recipients or call an API, and the platform handles conversion, routing, screening, and delivery.

‍

When it works: recurring payouts, dozens to thousands of recipients, finance teams that need clean fiat reporting, and businesses that don't want to become a crypto operation.

‍

How a typical batch runs:

‍

1. Fund in fiat or stablecoin. Top up a balance — with a provider like INXY you can fund in EUR or USD via SEPA or SWIFT, so you never have to source crypto yourself.
2. Upload or connect. Submit a CSV (recipient, amount, network) or send the batch through the API.
3. Automated checks. The platform runs KYT and sanctions screening, auto-converts, and routes each payout to the right network.
4. Recipients get paid. Delivery happens in minutes on supported low-fee networks.
5. Report in fiat. You get batch-level exports with fiat values, fees, payout IDs, and transaction hashes — ready for reconciliation.

‍

The trade-off is that you rely on a provider, but you remove key management, gas operations, compliance gaps, and accounting cleanup in one move.

Five mistakes that cost real money

1. Wrong network. The most common irreversible loss. Always match the recipient's network to the address.
2. Forgetting gas. A wallet full of USDT can't move without the native token for fees.
3. No test transfer. For a new large recipient, send a small amount first and confirm receipt.
4. Skipping screening. Paying a sanctioned or high-risk address is a legal and banking risk, not just a crypto one.
5. Weak records. If you can't tie every hash to a fiat value and a recipient, month-end close becomes painful.

Frequently asked questions

Can I send USDT to many wallets in one transaction? On some networks, yes — a "multisend" smart contract bundles multiple recipients into one on-chain transaction. Otherwise, batching is handled off-chain by a platform that submits the transfers for you.

‍

What's the cheapest way to send USDT in bulk? Low-fee networks such as Tron (TRC-20), Solana, and TON dramatically reduce per-transfer cost versus Ethereum. See our full USDT network fees comparison.

‍

Do I need to hold crypto to run USDT payouts? Not with a fiat-native platform. You can fund in EUR or USD, keep your accounting in fiat, and let the provider handle conversion and delivery.

‍

Is bulk USDT sending safe? The transfer itself is irreversible, so accuracy matters. Reputable platforms add address validation, KYT, and sanctions screening to reduce risk — protections that manual and script-based methods lack.

Scale it without the overhead

Manual works for a handful of payees; scripts work if you want to run infrastructure. If you'd rather send USDT to hundreds or thousands of recipients from a fiat balance — with screening and clean reporting built in — that's exactly what INXY's mass USDT payouts are built for.

‍

1 July 2026. Today marks the beginning of a new chapter for Europe's digital asset industry. The transitional period under the EU's Markets in Crypto-Assets Regulation (MiCA) has ended, and the standard for operating a crypto business in Europe has been raised for good.

‍

For years, much of the industry was built around a single jurisdiction. One license. One operating model. That worked while the rules were still evolving. It works less well now.

‍

We want to be transparent with our clients about where INXY stands and what we did about it. INXY did not obtain a MiCA authorization in Poland. So rather than depend on any single jurisdiction, we moved to a multi-jurisdiction operating model — and before 1 July, we completed the migration of every client off our Polish entity. No payments paused. No settlement stopped.

‍

Here's what MiCA is, what changed on 1 July, and how our model is built to keep your payments running through moments exactly like this one.

What is MiCA?

MiCA (Markets in Crypto-Assets Regulation) is the European Union's comprehensive framework for regulating crypto-assets and the companies that provide crypto services. It replaces a patchwork of national rules with a single, harmonized rulebook across all 27 member states.

‍

In practice, MiCA does three main things:

‍

• Licenses providers. Any company offering crypto-asset services — custody, exchange, transfers, payouts — must be authorized as a Crypto-Asset Service Provider (CASP) by a national regulator. A CASP license can then be "passported" across the EU.
• Regulates stablecoins. Issuers of stablecoins ("e-money tokens") must be authorized and hold strict, fully-backed reserves. This is why compliant stablecoins like USDC and EURC stayed available on EU-regulated venues while non-authorized ones were delisted. (More on this in "Is USDC regulated?")
• Sets conduct and transparency standards for how services are marketed and delivered.

‍

MiCA's rules for service providers began applying on 30 December 2024, with a transitional window for existing firms.

What changed on 1 July 2026

MiCA included a transitional ("grandfathering") period under Article 143. Firms already operating legally under national regimes before 30 December 2024 could continue serving clients — but only until they obtained a CASP license or until 1 July 2026, whichever came first. That date has now passed, and there is no extension mechanism in the regulation.

‍

From today, any provider serving EU clients must hold a MiCA CASP authorization. A legacy national registration no longer provides cover.

‍

The situation in Poland made this especially clear. Poland has not yet enacted the national Crypto-Asset Market Act needed for its regulator (KNF) to issue CASP licenses — the act has been vetoed repeatedly, most recently in June 2026. In practice, that left Polish-registered providers with no domestic path to a CASP license before the deadline.

The limits of a single-jurisdiction model

MiCA is not simply making it harder to launch a crypto business. It is redefining what it means to run one: no longer just "get a license and go," but "operate reliably inside a regulated financial system."

‍

That shift began well before 1 July. Across the market, some companies are spending the coming months restructuring. Some are migrating clients. Some are rethinking how they serve Europe altogether. The common thread is that betting an entire operation on one jurisdiction has become a single point of failure.

INXY's response: a multi-jurisdiction operating model

For payment infrastructure providers, continuity is not optional. Payments cannot pause because the regulatory landscape changes. Businesses still need to settle funds. Cross-border commerce continues every day. Infrastructure should adapt so that businesses don't have to.

‍

That is why INXY expanded beyond a single jurisdiction and built a multi-jurisdiction operating model, spanning:

‍

• Canada — registered Money Services Business (FINTRAC MSB M23375535)
• El Salvador
• Cyprus
• Switzerland

‍

We did not build this because a deadline forced our hand at the last minute. We built it because our B2B clients need reliability that does not depend on the regulatory status of any one country. When the Polish route closed, that model is what let us complete the migration of all clients off our Polish entity before 1 July 2026 — with no interruption to payouts, settlement, or reporting.

What this means for you

• Your service continues. Clients were migrated ahead of the deadline and are served through our appropriately licensed entities. There is no gap in payouts or settlement.
• Your funds and reporting are unaffected. Fiat-denominated reporting, payout records, and reconciliation continue exactly as before.
• Your compliance standards are unchanged. Full KYB, KYC where needed, real-time transaction monitoring (KYT), and sanctions screening remain in force across every jurisdiction we operate in.

Regulation is becoming the foundation, not the obstacle

One conclusion runs through all of this: regulation is no longer just about compliance. It is becoming the foundation that enables institutional adoption of stablecoin infrastructure at scale. The businesses that treat regulatory resilience as core infrastructure — not paperwork — are the ones that will serve the next phase of the market.

‍

That's the central theme of our latest research, Stablecoins 2026: The New Global Financial Settlement Layer, which maps the regulatory landscape and what it means for businesses building on stablecoin rails. (Link / request the report: [add URL].)

Frequently asked questions

Did INXY obtain a MiCA license? No. INXY did not obtain a MiCA authorization in Poland. Instead of relying on a single jurisdiction, we operate a multi-jurisdiction model across Canada, El Salvador, Cyprus, and Switzerland, chosen to give our B2B clients continuity.

‍

What happened to clients on the Polish entity? All clients were migrated off our Polish entity before 1 July 2026. The migration was completed ahead of the MiCA transitional deadline, with no interruption to payments.

‍

What is MiCA, in simple terms? MiCA is the EU's single set of rules for crypto companies and crypto-assets. It requires service providers to be licensed as CASPs and sets strict standards for stablecoins, consumer protection, and transparency across all member states.

‍

What happened on 1 July 2026? MiCA's transitional period ended. From this date, providers serving EU clients must hold a MiCA CASP license; legacy national registrations no longer provide cover.

‍

Will my payments pause? No. Continuity was the entire point of moving to a multi-jurisdiction model. Client migration was completed before the deadline, and settlement continues without interruption.

Talk to us

Regulatory change raises real questions for any business that moves money across borders. If you'd like to understand how our multi-jurisdiction model supports your payouts, contact our team — and we'd be glad to share our perspective as the industry enters this new phase.

‍

This update is provided for information and does not constitute legal advice. Regulatory details are accurate as of 1 July 2026 and may evolve.

‍